1. RC959-4FE16E1

RC959-4FE16E1 is an inverse multiplexer that transmits Fast Ethernet service over bonded E1 circuits. The device is typically deployed in pair, and can deliver 2~32Mbps Ethernet service according to customers' requirements. Designed following the standard GFP EoPDH encapsulation, the device supports LCAS, with which the service channel established by the pair of device will not be down even if unstable or broken-down E1 links exists in the TDM network.

RC959-4FE16E1 provides 16 VCG, which allows carriers and service providers to access multiple users and provision service channel bandwidth conveniently.

The device has three working mode: VLAN unaware mode, VLAN aware mode and Q-in-Q mode. When working in VLAN unaware mode, the device will forward any packets received. When working in VLAN aware mode or Q-in-Q mode, the device will forward received packets according the pre-set forwarding rules based on VLAN tags.

RC959-4FE16E1 supports various diagnostic tools such as local and remote E1 loopback, E1 BER testing, loopback detection, and etc. The pair of RC959-4FE16E1 can also be fully monitored and managed on the GUI of Raisecom NView NNM system. All this tools provide ways of quick fault isolation, which will help save time and cost of carriers and service providers.

feature

  • Fast Ethernet over 16 E1, Standard GFP-F encapsulation
  • VCAT, LCAS supported, latency between E1 members:±256ms
  • 16 VCG, at most 16 E1 members in one VCG
  • Three working mode for Ethernet packets switching: VLAN-unaware, VLAN-aware, Q-in-Q
  • 8K MAC address table, full MAC address table management
  • MTU up to 9000 Bytes
  • E1/VCG to Gigabit Ethernet fault pass through
  • E1 loopback test, E1 inbuilt BER tester, E1 loopback detection, VCG-based loopback detection
  • E1 port, VCG, FE port statistics monitoring
  • Full CLI management via local CONSOLE or Telnet
  • Full management on the GUI of NView NNM system that covers both local and remote RC959-4FE16E1
  • When working in pair, the remote RC959-4FE16E1 can be discovered and managed on both CLI and GUI; when working as remotes of RC959-GESTM1, can be managed via central office device
  • Redundant power supply

 

Back to Top | ASC-100-FE-B/V | RC952-FEE1 | MCS100-SC - Fast Ethernet Fiber Converter | 1000SX AND 1000LX - Gigabit Ethernet Fiber Optic Converter | V-REBplus | RC953E-GESTM1 Inverse Multiplexing Ethernet Gateway | RC952-FEDS3/E3 | RC953-FE4E1/FE8E1 | RC954-FE4E1/8E1 (-BL) |